The Ultimate Guide to SMT Machines: What They Are & Как выбрать

What Are SMT Machines? What’s the Function?

СМТ-машины, also known as Surface Mount Technology machines, refer to a broader category of machines in the Технология поверхностного монтажа process including equipment for placing components, applying solder paste, пайка оплавлением, and inspection systems. По факту, these machines allow us to position surface mount components, как резисторы, конденсаторы, integrated circuits and LEDs, rapidly and accurately at certain locations on a PCB. SMT machines can place as little as 0.4 x 0.2mm, and they can place hundreds or even thousands of parts per hour. They aid in the increase in the manufacturing production speed and accuracy and are used widely around the world.

Different Types of Surface Mount Assembly Machines

В соответствии с последовательностью Сборка печатной платы поверхностного монтажа процесс, we will list the equipment used one by one:

  • Solder Paste Printing Machine

In SMT process, this machine exactly apply the solder paste on the PCB pads. Вот как это работает: In using a stencil and squeegee system to distribute the paste evenly, they are able to make sure the components will be mounted correctly in subsequent stages.

  • Проверка паяльной пасты (SPI) Машина

After applying paste, this crucial machine then uses advanced 3D imaging to inspect the solder paste. It grades volume, alignment and height while identifying any defects that could cause soldering problems.

  • Pick-and-Place машина:

This kind of machines are available in three types:

  1. Руководство: Hand operated, suitable for small volume production or rework.
  2. Semi-Automatic: Combines manual and automatic features, providing computerized visualization to guide operators in accurate component placement.
  3. Automatic: The most advanced type, offering high speed, точность, и эффективность. It significantly reduces labor costs and human error.
  • SMT Сборка печи для отверждения

After component placement, this oven then cures the solder paste and secures components to the PCB.

  • Паяльная машина оплавлением

This critical equipment is used to preheat components and melt the solder paste which in turn form permanent connection between the SMDs to the PCB. The design is meant to enable solid joints without damaging sensitive parts.

  • Оборудование для очистки растворителем

This machine removes any residual flux and excess solder from PCB to give a clean surface for best performance.

  • Ремонтно-диагностическое оборудование

The last stage which comes in at a sophisticated machinery that checks assembled PCB for any defect. Кроме того, it assists in fixing these issues to ensure the quality.

Вершина 8 SMT Pick And Place Machine Brands in the World

Pick and place machine plays a critical role of the overall SMT line, we list the best 8 SMT pick and place machines and explain their features one by one as followed:

1. Panasonic SMT Chip Mounter

As a leader in industrial automation, Panasonic provides advanced SMT solutions that have precision, гибкость, и масштабируемость. There is a rich variety of models in their SMT machines, to satisfy different customer needs.

Popular Model: Panasonic NPM-W2

Ключевая особенность:

  • For PCBs up to a size of 750 Икс 550 мм
  • Скорость: 77,000 CPH(chips per hour)
  • 16 nozzle head, легкий.
  • точность размещения: up to 25um (cpk ≥ 0)

2. Yamaha Pick and Place Machine

Yamaha is well known for its robust and high performance SMT machines with the best solutions for high speed and high precision assembly lines. The reliability of their machines is high and they are widely used for mass production.

Popular Model: Yamaha YSM10

Ключевая особенность:

  • Точность: ±03 mm
  • Скорость: Вплоть до 50,000 CPH
  • Dual-lane capability
  • Very versatile regarding various component types and fast changeover.

3. JUKI SMT Pick and Place Machine

JUKI, a powerful brand in the SMT industry, provides quick and cost-effective pick and place machines designed for high volume and smaller quantity production. Their machines for reliability and ease of use are well known.

Popular Model: JUKI FX-3

Specifications:

  • Точность: ±05 mm
  • Placement speed (чип): 0.040Сек. / чип(90,000CPH)*2
  • Размер компонента: 33.5mm×5mm
  • 4 placement heads, 24 nozzles, 4 gantries and 2 stations
  • Holds up to 240 составные части

4. Fuji SMT Placement Machine

Fuji’s SMT placement machines are innovative and modular—high density is achieved and throughput is excellent. They’re flexible and perfect for a changing production needs.

Popular Model: Fuji NXT III

Ключевая особенность:

  • Точность: ±02 mm
  • Faster XY robot and tape feeders
  • Скорость: 37,500 cph
  • Supports the utilization of the smallest parts in mass production

5. Mycronic SMT Machine

Mycronic’s SMT machines are known for their efficient handling of high mix, low volume processes. Robust design, easy to use and efficient tape cutting.

Popular Model: Mycronic MY300

Specifications:

  • Вплоть до 224 feeder positions
  • 40,000 CPH high speed all in one mounter
  • Large range of components
  • On-the-fly changeovers

6. Hanwha Pick and Place Machine

Hanwha, formerly Samsung Techwin, provides reliable and scalable SMT solutions for large and even super large production. Their machines are known for speedy and good performance.

Popular Model: Hanwha HN Series

Specifications:

Скорость: 92,000 CPH

Точность: ±25 μm @ Cpk ≥ 1.0(IC)

Component Range: 03015-L75 mm

7. Europlacer SMT Machine

The Europlacer is a versatile and high capacity SMT placement machine. This is good for production lines that need a lot of changes and many tasks.

Popular Model: Europlacer iineo series

Specifications:

  • Component range: 01005 to 50mm x 50mm
  • Max Component Height: 34мм
  • Tornado heads with 2 Икс 8 или же 12 nozzles
  • Max PCB Size: 1610mm x600mm
  • Точность размещения: 22а (QFPS) TO 46um (CHIPS) @ 3 Sigma

8. ДДМ Новастар

DDM Novastar offers low cost and compact SMT solutions for small to medium production lines. It turns out their machines have the reputation of being simpler to use, making them a nice fit in smaller operations or prototyping environments.

Popular Model: LS60 Pick and Place Machine

  • Ключевая особенность:
  • Точность: +/- .001» (0.025мм)
  • Placement speed: вплоть до 4800 cph
  • Вплоть до 96 tape feeders
  • Max board size: 343mm x 813mm
  • Fine pitch capability: к 15 mil pitch
    The table below provides key information on the eight most popular SMT pick and place machines, offering a quick overview
    Примечание: Price range is based on rough estimates and could differ significantly from actual costs and depending on the price configuration, функции, и рыночные условия. You should always check with manufacturers or authorized dealers for accurate, up to date pricing.

How to Choose the Best Surface Mount Machines?

Выбор подходящего станка SMT для вашей сборочной линии — непростая задача., есть несколько факторов, которые вы должны учитывать, прежде чем принимать решение:

  • Скорость размещения компонентов

The focus of the initial research on the purchase of SMT placement machine is on the placement speed. There exist different placement machines, at different placement speed and it is essential to select one that fits within your production needs and your budget. They can be checked against the IPC 9850 стандарт, which states the desired speed of their pick and place machines.

  • Точность размещения

Another important aspect is placement accuracy. With more accurate machines, yields are higher and they can perform better. To get the best accuracy you need an optimal SMT machine with an accuracy of 0.0001″ and a fine pitch lead of 12mil.

  • Повторяемость машины

Конечно, picking an SMT machine is not only about how accurate it will be, but also if it will consistently produce the same results. Repeatability is another factor you should consider, especially with machines that run on programmed software solutions.

  • Размер деталей

Еще один важный фактор, который следует учитывать, — размер детали.. Например, машина для захвата и размещения должна быть в состоянии обрабатывать детали размеров 0402, 0201, а также 01005. If your other requirements for your machine are being met, but the machine does not support these sizes, you can buy a nozzle (or a feeder) which will make it possible to produce circuit boards of these sizes.

Последние мысли

This blog should give you some idea about what SMT equipment you need if you want assemble electronic boards, and suggestions on which brands you can purchase the SMT pick and place machines. тем не мение, it might not be the most efficient approach to pay for purchasing these expensive machines if you are making only a few boards. В таких ситуациях, partnering with a responsible PCB manufacturer is a better alternative as they could supply faster and more reliable services. Equipped with the best industrial equipment, MOKO Technology can provide the one stop PCB assembly services including PCB manufacturing and PCB assembly and inspection for customers. Want to learn more? Свяжитесь с нами сегодня!

Уилл Ли

Уилл разбирается в электронных компонентах, Процесс производства и технология сборки печатных плат, и имеет большой опыт в области надзора за производством и контроля качества. На предпосылке обеспечения качества, Will предоставляет клиентам наиболее эффективные производственные решения.

Недавние Посты

Why PCB Warpage Happens and How You Can Prevent It?

В процессе производства печатных плат, PCB warpage is a common problem that manufacturers would encounter.

1 day ago

What Is a PCB Netlist? Все, что вам нужно знать, здесь

In the world of printed circuit board design and manufacturing, precision and accuracy are paramount.

2 weeks ago

What Is Solder Wetting and How to Prevent Poor Wetting?

Soldering is a cornerstone technique in electronics assembly, it's used to connect electrical pieces and

1 month ago

7 Critical Techniques to Improve PCB Thermal Management

Настоящее время, electronic products are both compact and lightweight while performing a variety of functions. Этот…

1 month ago

What Is BGA on a PCB? A Complete Guide to Ball Grid Array Technology

As technology continues to advance in the electronics industry, packaging remains one of the key

2 months ago

How to Create a PCB Drawing: A Step-by-Step Guide for Beginners

Bringing your electronic ideas to life begins with PCB drawing, which is the process of

3 months ago