PCB-ontwerp

Zijn er problemen als ik verander? 0805 te 0402 opbouwmontage of kleiner?

0402 obviously is harder to hand assemble. If you need to get them assembled by machine, please notice the following tips.

  • The assembler’s pick & place machine can even handle 0402 at a good rate & opbrengst.
  • Double-sided load. Some boards just need this assembly step, like BGA often puts decoupling caps on the bottom of the board.
  • Elektrische eigenschappen. The obvious one is, natuurlijk, the power rating of resistors. Voltage rating is not only likely worse due to the physical smaller dimensions, but also consider the voltage bias degradation effect of ceramic class 2 condensatoren. For smaller packages in same voltage/capacitance, this effect may be worse.

Aan de andere kant, some properties, like lead inductance, is lower. Daarnaast, sometimes you can put capacitors right at the chip pins for QFP style packages, while routing signals underneath the chip. In effect, the loop area for the decoupling capacitor is much much smaller than a larger size capacitor, which may be placed further away to comply with signal routing.

Lees verder: PCB-ontwerp- en lay-outservices

#PCB-ontwerp

Olivier Smit

Oliver is een ervaren elektronica-ingenieur met kennis van PCB-ontwerp, analoge circuits, ingebedde systemen, en prototyping. Zijn diepgaande kennis omvat schematisch vastleggen, firmware-codering, simulatie, indeling, testen, en probleemoplossing. Oliver blinkt uit in het omzetten van projecten van concept naar massaproductie met behulp van zijn elektrische ontwerptalenten en mechanische vaardigheden.

recente berichten

BGA Reballing: An Essential Process in Electronics Repair and Maintenance

BGA reballing emerges as a critical repair technique for modern electronic devices. Vandaag de dag, elektronische apparaten…

6 days ago

What Are PCB Stiffeners? Exploring Their Types, Uses, and Thicknesses

Do you know what PCB stiffeners are? They are widely used in flex and rigid-flex

3 weeks ago

Why PCB Warpage Happens and How You Can Prevent It?

In the PCB manufacturing process, PCB warpage is a common problem that manufacturers would encounter.

1 month ago

What Is a PCB Netlist? Alles wat u moet weten, vindt u hier

In the world of printed circuit board design and manufacturing, precision and accuracy are paramount.

2 months ago

What Is Solder Wetting and How to Prevent Poor Wetting?

Soldering is a cornerstone technique in electronics assembly, it's used to connect electrical pieces and

2 months ago

7 Critical Techniques to Improve PCB Thermal Management

Vandaag de dag, electronic products are both compact and lightweight while performing a variety of functions. Dit…

2 months ago