Que devons-nous vérifier avant de publier une conception de PCB?

Check that what you want can be manufactured. Apply design rules and check indicated violations.
Check the layers stack.
Check the board in 3D view to clean any obvious errors.
Print 3D model and check with your mechanical designers.
Check the via diameters. Unify some of the hole diameters. Add more stitching to the polygons. Check that you have tenting where you want the solder mask cover. Modify paste rules to remove paste from test pads. Replace non-plated holes with board cutouts. Generate keep out layer.
Check layout in single layers and in pairs.
Generate and check Gerber layers of the single circuit.
Check Gerber layers of the panelized board.
Send the files to yourprocurement. Make sure that your attached comments and contact details are provided with the order and not removed by your purchasing guy. Get ready for the queries. Answer them back.

#Assemblée PCB #PCB réconcevoir

Olivier Smith

Oliver est un ingénieur en électronique expérimenté, spécialisé dans la conception de PCB., circuits analogiques, systèmes embarqués, et prototypage. Ses connaissances approfondies couvrent la capture schématique, codage du micrologiciel, simulation, disposition, essai, et dépannage. Oliver excelle dans l'art de faire passer des projets du concept à la production de masse en utilisant ses talents de concepteur électrique et ses aptitudes en mécanique..