Cómo seleccionar el espesor de cobre de PCB adecuado?

Las pistas de cobre en una placa de circuito impreso transportan señales electrónicas y distribuyen energía entre componentes y dispositivos.. This complex network of conductive pathways allows all the functional elements on the board to operate in harmony. One of the most important design decisions when engineering a PCB is determining the appropriate PCB copper thickness for the traces. En este articulo, we’ll look closely at the common copper thicknesses used in PCBs, discuss why utilizing thicker copper is advantageous in high power applications, and go over the key factors designers must consider when selecting the optimal circuit board copper thickness for their particular circuit requirements and constraints. vamos a sumergirnos.

Common Copper Thicknesses Used in PCB

Copper thickness refers to the weight of the copper foil laminated onto the Sustrato de PCB, expressed in ounces per square foot (oz/ft2). Typical weights range from 0.5 oz to 3 onz:

0.5-1 oz copper thickness: An extremely thin copper foil at 0.0007 inches thick. Used for lightweight, low current PCBs where tight trace spacing and thin board profile are needed. The minimum trace size and spacing are very small with one ounce copper thickness.

1-2 onzas de cobre: The standard and most common copper weight for general PCB designs. It provides a balance of electro-thermal performance and manufacturability. Suitable for most medium complexity PCBs.

3 onzas de cobre: Considered a heavy copper PCB. It is robust enough for high current power circuits, which can handle up to around 8-10A per trace before overheating or voltage drop becomes an issue. It provides enhanced stability and reliability.

Why Use Heavy Copper in PCB?

While utilizing heavy copper foils increases PCB cost, there are important advantages that make it the right choice for high power circuit designs:

  • Handles higher current without overheating traces – The thicker copper has lower resistance, allowing more current to flow without excessive resistive heating. This prevents damage from over-temperature.
  • Lower voltage drop across traces at high currents – Thicker copper traces reduce unwanted voltage drop along the trace length, ensuring signals and power are delivered at the correct levels across the PCB.
  • Improved heat spreading and thermal management – Copper is an excellent thermal conductor. Heavycopper acts as a heat spreader, quickly conducting heat away from hot spots and distributing it over a larger area for dissipation. This enables proper circuit operation at higher temperatures.
  • Withstands high temps and repeated thermal cycling – The high thermal mass and conductivity of thick copper make it far more resistant to damage from high temperatures and repeated heating/cooling cycles compared to thin foils.
  • Reduces EMI compared to thinner traces – Thicker traces generate less electromagnetic interference vs thin traces with identical current, due to the reduced AC resistance. This EMI reduction is beneficial for EMC compliance.
  • Increases overall reliability and product lifetime – The superior current capacity, rendimiento térmico, and durability of PCB de cobre pesado enhance the reliability and usable product lifetime, especially in demanding high-power environments.

How to Choose PCB Copper Thickness?

Selecting the optimal PCB copper thickness for a particular design requires considering several interrelated factors:

  • Current levels – The expected maximum current in each trace determines the minimum thickness needed to avoid overheating. Por ejemplo, traces carrying over 5A typically need thicker 2oz copper or more. Match the thickness to the current.
  • Number of layers – A PCB with more copper layers allows the use of thinner copper overall, since current can be divided over multiple layers. UNA 2-layer board often needs thicker 2oz copper compared to a 4-layer or 6-layer board for the same current.
  • Target trace resistance – Lower resistance requires thicker traces all else being equal. Calculate the resistance per unit length for different thicknesses at the desired trace width to meet resistance targets.
  • Cost – Thicker copper material intrinsically costs more than thin material. Weigh the cost increase against the electrical performance benefits to fit the budget.
  • Manufacturing limits – Thick copper over 2oz may require special processing equipment. It also impacts the achievable trace resolution, spacing between traces, and registration accuracy. Consult manufacturer capabilities.
  • Thermal loads – Carefully calculate the overall thermal power dissipation in the PCB to ensure the copper can spread and sink the heat without overheating. Consider ambient temperature and air/liquid cooling options.

Pensamientos finales

Selecting the optimal copper thickness in PCB design is a complex balancing act that requires thoroughly analyzing the expected current loads, thermal dissipation characteristics, manufacturability limitations, and material cost tradeoffs. Heavier copper weights with excellent current capacity and thermal performance do come at the price of increased board dimensions and expense. PCB designers must judiciously match the trace copper thickness to the electrical needs and constraints of the application, while considering all interdependent design factors. With informed trace thickness decisions, board performance can be maximized within the available budget and fabrication capabilities. Contáctenos if you need assistance determining the ideal copper weight for your next PCB.

ryan-chan

Ryan es el ingeniero electrónico senior en MOKO, con más de diez años de experiencia en esta industria. Especializado en diseño de diseño de PCB, diseño electronico, y diseño embebido, proporciona servicios de diseño y desarrollo electrónico para clientes en diferentes campos, de IoT, LED, a la electrónica de consumo, médico y así sucesivamente.

Mensajes recientes

Why PCB Warpage Happens and How You Can Prevent It?

En el proceso de fabricación de PCB, PCB warpage is a common problem that manufacturers would encounter.

14 hours ago

What Is a PCB Netlist? Todo lo que necesitas saber está aquí

In the world of printed circuit board design and manufacturing, precision and accuracy are paramount.

2 weeks ago

What Is Solder Wetting and How to Prevent Poor Wetting?

Soldering is a cornerstone technique in electronics assembly, it's used to connect electrical pieces and

1 month ago

7 Critical Techniques to Improve PCB Thermal Management

Hoy en día, electronic products are both compact and lightweight while performing a variety of functions. Esta…

1 month ago

What Is BGA on a PCB? A Complete Guide to Ball Grid Array Technology

As technology continues to advance in the electronics industry, packaging remains one of the key

2 months ago

How to Create a PCB Drawing: A Step-by-Step Guide for Beginners

Bringing your electronic ideas to life begins with PCB drawing, which is the process of

3 months ago