Welche Arten von Tests eignen sich für Leiterplattenbestellungen in kleinen Stückzahlen??

For the order with large volumes, a certified factory usually tests the bulk for you without informing you. For low-volume PCB, we suggest

Fliegende Sonde (basically an automated way of contacting pins and checking if the resistance meets expected values). This also comes relatively cheap since the programs can be created from netlists which have to be specified by the customer.
In-Circuit-Tests: This is probably the most extensive test method we use (and also the most expensive). Grundsätzlich, we build an adapter that will host the DUT and contacts the various test points. Using integrated Boundary Scan techniques and stimulating digital and analog signals nearly every mode of testing is possible.
Boundary Scan: The Flying Probe can mainly contact test points or larger points such as resistors, … if there is no available point to touch it on the PCB, the Flying Probe is of no use. To test Inter-IC connections we mainly rely on Boundary Scan Tests if the Controller supports these. But they have their limits as well. Ebenfalls, programs can be “written” automatically but need to be adapted.

These can basically cover the requirements. Immer noch, 100% testing is not possible, but it is a good idea to manage the quality and your supplier.

#PCB-Bestückung #PCB-Tests

Oliver Smith

Oliver ist ein erfahrener Elektronikingenieur mit Erfahrung im PCB-Design, Analoge Schaltungen, eingebettete Systeme, und Prototypenbau. Sein umfassendes Wissen umfasst die schematische Erfassung, Firmware-Codierung, Simulation, Layout, testen, und Fehlerbehebung. Oliver zeichnet sich durch die Umsetzung von Projekten vom Konzept bis zur Massenproduktion aus, wobei er sein Talent als Elektrodesigner und sein mechanisches Geschick einsetzt.