The PCB has a pulse oximeter mounted on the surface, and it's tolerance is 0.6mm. The problem is the pulse…
I am designing a board that needs a couple linear regulators (5.5v to 3v and 3v to 1.6v) but I…
I'm designing a new PCB where I have a whack of connectors that have to line up with the metalwork.…
We found that edge-mounting a TO-Can package to a PCB will really save a lot on manufacturing. However, it comes…
My small PCB is mounting a very sensitive fragile sensor on the top surface that has to be wire bonded…
I am prototyping a PCB, using Chip Quik's "SMDSWLF.031, a Sn96.5/ Ag3.0/ Cu0.5 solder with 2.2% no-clean flux. I find…
I'd like to use a processor that uses a pin grid array. Basically, I'd like to make the prototyping PCB…
I'm making a 4 layer PCB prototype that uses a bluetooth mcu connected to a 2.4GHz chip antenna. I'm thinking…
I want to implement a control system I designed for a light electric motorbike. I would like to mount it…
I am wondering if i ordered some aluminum pcbs that contain D2pak transistors and i want to solder a couple…