What is the difference between thin film and thick film precision surface mount resistors?

I'm using some 0.1% precision 10k and 150k resistors. They are thin film 0603 surface mount. For a lot more, there are also thick film types. Fundamentally and practically, what is the difference between these two?

December 8, 2023

Thick film resistors are screen-printed. The alumina substrate is metalized then a resistive paste is deposited on top of the terminals. It is later trimmed, coated, metalized on the edges, and plated.

Thin film (or metal film) resistors have said film vacuum deposited, allowing for a much more uniform and controlled resistive element. They then undergo similar finishing steps to trim, coat, and metalize the edges.

As a result, thick film resistors are generally cheaper than their thin film counterparts, but the tolerance and temperature coefficients one can get out of thin film resistors are generally better. Depending on the materials used, there is plenty of overlap between the two, but all things equal, thin film offer better performance for a cost premium.

Oliver Smith

Oliver is an experienced electronics engineer skilled in PCB design, analog circuits, embedded systems, and prototyping. His deep knowledge spans schematic capture, firmware coding, simulation, layout, testing, and troubleshooting. Oliver excels at taking projects from concept to mass production using his electrical design talents and mechanical aptitude.

Oliver Smith

What Others Are Asking

How can I determine BGA land pad diameter for given ball diameter?

I’m working on a project which requires the use of a CSP package. The product’s datasheet provides ball pitch and ball diameter but nothing about the preferred land pad diameter.
How can the pad diameter be worked out from these figures assuming an NSMD land?

Oliver Smith November 21, 2023

How do you mount electronics on a vehicle chassis safely?

I want to implement a control system I designed for a light electric motorbike. I would like to mount it as professionally as possible on the chassis. It consists of a power system pcb and a SAMC21 development board which I’ll merge later once this all works properly. I have tried screwing it directly on the aluminium chassis but have found that shocks and vibrations from the horn disturbed the system or even destroyed it upon large shocks. Is there a specific way car and motorcycle manufacturers mount their electronics to make their system as robust as possible?

Oliver Smith November 29, 2023

What are some of the benefits and downsides of moving from a two layer PCB with components on a single side, to a four layer PCB with components on both sides?

We got a quotation sheet of four layers board but it greatly exceed our budget. So now we are thinking about reduce layers to save cost. Does this solution work?

Oliver Smith October 8, 2023

What is the difference between thin film and thick film precision surface mount resistors?

Oliver Smith

Oliver Smith

What Others Are Asking

How can I determine BGA land pad diameter for given ball diameter?

How do you mount electronics on a vehicle chassis safely?

What are some of the benefits and downsides of moving from a two layer PCB with components on a single side, to a four layer PCB with components on both sides?

Read Detailed Advice From Blog Articles